CarrollTouch 4000S Serial Controller (Discontinued March 2006)
2.30" x 3.30" x 0.40" / 58.42 mm x 83.82 mm x 10.16 mm
EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
Hardware handshaking: RTS/CTS
DSR is pulled HIGH (>+3V) by the 4000S when connected and powered. DTR can be asserted by the host to interrupt the flow of data
Approximately 25 ms per coordinate set
Four-layer surface-mount design with internal ground plane for EMI suppression
The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.
Shock and Vibration
Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances
电流 - 工作模式
Full Infrared SmartSet protocol
-20°C to 70°C
-40°C to 85°C
Operating: 0% to 95% RH, noncondensing
Storage: 0% to 95% RH, noncondensing
All mounting holes are plated through for chassis ground connection
Connectors and Pin Definitions
The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.
Contact Elo for more information.